Page 162 - Catalog 2019-2020 Flipbook
P. 162

D E
DMT 104 CAD Technology Laboratory SolidWorks (Intermediate)
2 Units
DMT 202 Manufacturing and CNC Technology 2 Units Laboratory/CNC Machining 1
(Formerly MCNC 202.)
Credit course - Does not apply to De Anza Associate degree.
Corequisite: DMT 202 students must also be enrolled in DMT 84A.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technology labs for additional/advanced projects in DMT 84A, Introduction to Computer-Aided Numerical Control (CNC) Programming and Operation; Mills. Projects will vary based on the students skill level and the direction of the instructor.
DMT 203 Manufacturing and CNC Technology 2 Units Laboratory/CNC Machining 2
(Formerly MCNC 203.)
Credit course - Does not apply to De Anza Associate degree.
Corequisite: DMT 203 students must also be enrolled in DMT 84B.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technology labs for additional/advanced projects in DMT 84B, Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills. Projects will vary based on the students skill level and the direction of the instructor.
DMT 204 Manufacturing and CNC Technology 2 Units Laboratory/CNC Machining 3
(Formerly MCNC 204.)
Credit course - Does not apply to De Anza Associate degree.
Corequisite: DMT 204 students must also be enrolled in DMT 84C.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technology labs for additional/advanced projects in DMT 84C, Computer-Aided Numerical Control (CNC) Lathes and Horizontal Machining Centers; Programming and Operation, 4th Axis Rotary, Fixture Design. Projects will vary based on the students skill level and the direction of the instructor.
DMT 205 Manufacturing and CNC Technology 2 Units Laboratory/CAD CAM Programming 1
(Formerly MCNC 205.)
Credit course - Does not apply to De Anza Associate degree.
Corequisite: DMT 205 students must also be enrolled in any DMT 87A-E course. Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technologies labs for additional/advanced projects in DMT 87A-E, CAD/CAM Based Computer Numerical Control Programming Using Mastercam. Projects will vary based on the students skill level and the direction of the instructor. CNC equipment will be utilized to complete projects.
All courses are for unit credit and apply to a De Anza associate degree unless otherwise noted.
(Formerly CDI 104Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced intermediate projects and computer based training on SolidWorks software. Instruction is in the use of CAD technology using projects from other SolidWorks courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in SolidWorks software.
DMT 105 CAD Technology Laboratory Creo Parametric (Advanced)
2 Units
(Formerly CDI 105Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced advanced projects and computer based training on Creo software. Instruction is in the use of CAD technology using advanced extended projects based on other Creo courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in Creo software.
DMT 106 CAD Technology Laboratory SolidWorks (Advanced)
2 Units
(Formerly CDI 106Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced advanced projects and computer based training on SolidWorks software. Instruction is in the use of CAD technology using projects from other SolidWorks courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in SolidWorks software.
DMT 107 CAD Technology Laboratory Creo Parametric (Surfaces)
2 Units
(Formerly CDI 107Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced projects and computer based training on Creo software. Instruction is in the use of CAD technology using projects from other Creo courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in Creo software.
DMT 108 CAD Technology Laboratory SolidWorks (Surfaces)
2 Units
(Formerly CDI 108Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced projects and computer based training on SolidWorks software. Instruction is in the use of CAD technology using projects from other SolidWorks courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in SolidWorks software.
DMT 109 CAD Technology Laboratory Creo 2 Units Parametric (Sheetmetal)
(Formerly CDI 109Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced projects and computer based training on Creo software. Instruction is in the use of CAD technology using projects from other Creo courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in Creo software.
Drama
(See Dance and/or Theatre Arts course listings.)
 DMT 110 CAD Technology Laboratory Geometric Dimensioning and Tolerancing
2 Units
An introduction to macroeconomics focusing on aggregate economic analysis. Topics covered will include market systems, aggregate measures of economic activity including national income accounting, macroeconomic equilibrium, money and the banking system, money and the price level, classical macro theory, Keynesian macro theory, monetary and fiscal policy,international trade and economic growth.
ECON 1H Principles of Macroeconomics 4 Units - HONORS
(See general education pages for the requirement this course meets.)
(Not open to students with credit in ECON 1.)
(Admission into this course requires consent of the Honors Program Coordinator.) Prerequisite: MATH 212 or equivalent.
Advisory: EWRT 1A or EWRT 1AH or ESL 5; MATH 114 or equivalent.
Four hours lecture (48 hours total per quarter).
An introduction to macroeconomics focusing on aggregate economic analysis. Topics covered will include market systems, aggregate measures of economic activity including national income accounting, macroeconomic equilibrium, money and the banking system, money and the price level, classical macro theory, Keynesian macro theory, monetary and fiscal policy,international trade and economic growth.
ECON 2 Principles of Microeconomics 4 Units
(See general education pages for the requirement this course meets.) (Not open to students with credit in ECON 2H.)
Prerequisite: MATH 212 or equivalent.
Advisory: EWRT 1A or EWRT 1AH or ESL 5; MATH 114 or equivalent.
(Formerly CDI 110Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced projects and computer based training on CAD software. Instruction is in the use of CAD technology to create models and drawings complying with ANSI Y14.5 Geometric Dimensioning and Tolerancing. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in CAD software.
DMT 201 Manufacturing and CNC Technology Laboratory/Conventional Machining 1
2 Units
(Formerly MCNC 201.)
Credit course - Does not apply to De Anza Associate degree.
Corequisite: DMT 201 students must also be enrolled in DMT 80.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technology labs for additional/advanced projects in DMT 80, Introduction to Machining and CNC Processes. Projects will vary based on the students skill level and the direction of the instructor.
160
2O19-2O2O DE ANZA COLLEGE CATALOG
Economics
ECON 1
Principles of Macroeconomics
4 Units
 (See general education pages for the requirement this course meets.) (Not open to students with credit in ECON 1H.)
Prerequisite: MATH 212 or equivalent.
Advisory: EWRT 1A or EWRT 1AH or ESL 5; MATH 114 or equivalent. Four hours lecture (48 hours total per quarter).
   160   161   162   163   164